Product ID:AERO-DUSTER, MS-222F
MSDS Date:06/01/1999
FSC:6850
NIIN:01-346-9144
Status Code:A
MSDS Number: CLCLW

Emergency Phone: (203) 797-2212

Info Phone: 203-743-4447

Preparer: VICTORIA MORI

Cage: 18598

Telephone: 203-743-4447

Cage: 18598

ETHANE, 1,1,1,2-TETRAFLUORO-

CAS: 811-97-2

Health Hazards Acute and Chronic:INHALATION OF HIGH CONCENTRATIONS OF
VAPOR IS HARMFUL AND AMY CAUSE HEART IRREGULARITIES,
UNCONSCIOUSNESS OR DEATH. INTENTIONAL MISUSE CAN BE FATAL. VAPOR
REDUCES OXYGEN AVAILABLE FOR BREATHING AND IS HEAVIER THAN AIR.
LIQUID CONTACT CAN CAUSE FROSTBITE.
Medical Cond Aggravated by Exposure:

First Aid:INHALATION--IMMEDIATELY REMOVE TO FRESH AIR. KEEP PERSON
CALM. IF NOT BREATHING GIVE ARTIFICAL RESPIRATION. IF BREATHING IS
DIFFICULT GIVE OXYGEN. CALL A PHYSICIAN.EYE--IMMEDIATELY FLUSH EYES
WITH PLE NTY OF WATER FOR 15 MINUTES. CALL A PHYSICIAN.
SKIN---FLUSH WITH WATER AFTER EXCESSIVE CONTACT. WASH CONTAMINATED
CLOTHING BEFORE REUSE. TREAT FOR FROSTBITE IF NECESSARY BY GENTLY
WARMING AFFECTED ARE A.ORAL---INGESTION IS NOT CONSIDERED A
POTENTIAL ROUTE OF EXPOSURE.

Flash Point Method:TOC
Autoignition Temp:>750.C, 1382.F
Extinguishing Media:AS APPROPRIATE FOR COMBUSTIBLES IN AREA.
Fire Fighting Procedures:COOL CANS WITH WATER SPRAY. SELF-CONTAINED
BREATHING APPARATUS MAY BE REQUIRED IF CANS RUPTURE OR RELEASE
UNDER FIRE CONDITIONS.
Unusual Fire/Explosion Hazard:CANS MAY RUPTURE UNDER FIRE CONDITIONS.
DECOMPOSITION MAY OCCUR.

Spill Release Procedures:VENTILATE AREA---ESPECIALLY LOW PLACES WHERE
HEAVY VAPORS MIGHT COLLECT. REMOVE OPEN FLAMES.

Ventilation:NORMAL VENTILATION FOR STANDARD MANUFACTURINGPROCEDURES IS
GENERALLY ADEQUATE.
Other Protective Equipment:LINED BUTYL GOVES AND CHEMICAL SPLASH
GOGGLES SHOULD BE USED. UNDER NORMAL CONDITIONS, NO RESPIRATORY
PROTECTION IS REQUIRED WHEN USING THIS PRODUCT.
Supplemental Safety and Health

Boiling Pt:B.P. Text:-15.7 F AT 736 MM HG
Vapor Pres:96 PSIA AT 77 DEG F
Vapor Density:AIR=1, 3.6
Solubility in Water:0.15% BY WT AT 77 D F
Appearance and Odor:CLEAR, SLIGHT ETHEREAL ODOR, LIQUIFIED GAS
Percent Volatiles by Volume:100

ALKALI OR ALKALINE EARTH METALS-POWDERED AL, ZN, BE, ETC.
Stability Condition to Avoid:MATERIAL IS STABLE, HOWEVER, AVOID OPEN
FLAMES AND HIGH TEMPERATURES.
Hazardous Decomposition Products:134A CAN BE DECOMPOSED BY HIGH
TEMPERATURES (OPEN FLAMES, GLOWING METAL SURFACES) FORMING
HYDROFLUORIC ACID AND POSSIBLY CARBONYL FLUORINE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:COMPLY WITH FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.